Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #26

Edit by Guy Kuo

Edit approved by Guy Kuo

Before
After
Unchanged

Step Lines

[title] Bag Penetrator Flutter Valve Preparation
[* black] You will need a large or medium exam glove, rubber band, and a Halo bag penetrator flutter valve fitting.
[* black] Cut one ofUse the ''longest'' longer fingersfinger from glove and stretch its open end over the Halo flutter valve fitting.
[* red] Slipblack] Ensure glove finger onto flutter valve fitting pastis advanced past the groove. Secure with a rubber band in the groove.
[* black] Cut off distal 1/2 of rounded tip of gloveglove finger. Do ''not'' remove entire rounded portion of tip or valve action will be poor. After cutting, roll the cut portion between your fingers to break theensure cut open. (Cutting with scissors often seals glove material together atend opens. If finger is cut properly, its end should naturally be flat and nearly closed in absence of airflow.
[* icon_note] Valve is not intended as the primary inflow protection, continuous positive pressure is
the cut)main protection.
[* black] Cut one ofUse the ''longest'' longer fingersfinger from glove and stretch its open end over the Halo flutter valve fitting.
[* red] Slipblack] Ensure glove finger onto flutter valve fitting pastis advanced past the groove. Secure with a rubber band in the groove.
[* black] Cut off distal 1/2 of rounded tip of gloveglove finger. Do ''not'' remove entire rounded portion of tip or valve action will be poor. After cutting, roll the cut portion between your fingers to break theensure cut open. (Cutting with scissors often seals glove material together atend opens. If finger is cut properly, its end should naturally be flat and nearly closed in absence of airflow.
[* icon_note] Valve is not intended as the primary inflow protection, continuous positive pressure is
the cut)main protection.

Image 2

Old Version

New Version

Image 3

Old Version

New Version