bunnyscience

Site Navigation

Your Account

Choose Language

Changes to Step #26

Edit by Guy Kuo —

Edit approved by Guy Kuo

Before
After
Unchanged

Step Lines

[title] Bag Flutter Valve Preparation
[* black] You will need a large or medium exam glove, rubber band, a bag penetrator flutter valve fitting, and valve deflector.
[* black] Cut one of the longest fingers from glove. Stretch its open end over flutter valve fitting. Notice that the glove finger has a natural flatness. Also, the flutter valve penetrator has an elliptical end. Align flatness of glove finger with long axis of valve ellipse.
[* black] Ensure glove finger is advanced past the groove. Secure with a rubber band in the groove.
[* black] Cut off about 2/3 rounded tip of glove finger. After cutting, roll cut portion between your fingers to ensure cut end opens. If finger is cut properly, its end should naturally be flat and nearly closed in absence of airflow.
[* black] Cut off about 2/3 rounded tip of glove finger. After cutting, roll cut portion between your fingers to ensure cut end opens. If finger is cut properly, its end should naturally be flat and nearly closed in absence of airflow.
[* icon_note] Valving action is not intended as the primary inflow protection, continuous positive pressure is the main protection.