bunnyscience

Site Navigation

Your Account

Choose Language

Changes to Step #16

Edit by Guy Kuo —

Edit approved by Guy Kuo

Before
After
Unchanged

Step Lines

[title] 3D Parts
[* black] Halo and its fittings are created via 3D printing. The halo, fan mount and air connector blocks remain inside the bag and can be reused.are reused after cleaning
[* black] Bag penetrator and flutter valve fittings are outside the bag and must be replaced or sanitized between uses.uses.
[* black] Halo and its fittings are created via 3D printing. The halo, fan mount and air connector blocks remain inside the bag and can be reused.are reused after cleaning
[* black] Bag penetrator and flutter valve fittings are outside the bag and must be replaced or sanitized between uses.uses.
[* black] 3D print files for the Halo are available at https://www.thingiverse.com/thing:4243272 under theCreative Commons - Attribution - Non-Commercial license.
[* black] Prototype is PETG printed with nozzle at 255C/260C, bed 85/90C, 0.2 mm layer height, 3 perimeters, 4 top / bottom layers, 20% gyroid. Aim for superior interlayer fusion in your print settings.