Changes to Step #16
Step Lines
| [title] 3D Parts |
| [* black] Halo and its fittings are made via 3D printing. The halo, fan mount and air connector blocks remain inside the bag and are reused after cleaning |
| [* black] Bag penetrator and flutter valve fittings are outside the bag and must be replaced or sanitized between uses. |
| [* black] 3D print files for the Halo are available at https://www.thingiverse.com/thing:4243272 |
| [* black] 3D print files for the Halo are available at https://www.thingiverse.com/thing:4243272 |
| [* black] Prototype is PETG printed with nozzle at 255C/260C, bed 85/90C, 0.2 mm layer height, 3 perimeters, 4 top / bottom layers, 20% gyroid. Aim for superior interlayer fusion in your print settings. |