Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #16

Edit by Guy Kuo

Edit approved by Guy Kuo

Before
After
Unchanged

Step Lines

[title] 3D Parts
[* black] HaloBunny PAPR and its fittings are made via 3D printing. The haloloop, fan mount and air connector blocks remain inside the bag and are reused after cleaning
[* black] HaloBunny PAPR and its fittings are made via 3D printing. The haloloop, fan mount and air connector blocks remain inside the bag and are reused after cleaning
[* icon_note] Bag penetrator and flutter valve fittings are outside the bag and must be replaced or sanitized between uses. Soak PETG parts in 99% IPA if unable to dispose between uses. Ideal is to print enough penetrators so they can be single use.
[* black] 3D print files for the HaloBunny PAPR are available at https://www.thingiverse.com/thing:4243272
[* black] 3D print files for the HaloBunny PAPR are available at https://www.thingiverse.com/thing:4243272
[* black] 2nd repository at https://www.prusaprinters.org/prints/27657-halo-papr-powered-air-purifying-respirator
[* black] I print PETG with nozzle at 255C/260C, bed 85C/90C, 0.2 mm layer height, 3 perimeters, 4 top / bottom layers, 20% gyroid. Higher temperature than usual is to enhance interlayer fusion.