Changes to Step #16
Step Lines
[title] 3D Parts |
[* black] Bunny PAPR and its fittings are made via 3D printing. The loop, fan mount and air connector blocks remain inside the bag and are reused after cleaning |
[* icon_note] Bag penetrator and flutter valve fittings are outside the bag and must be replaced or sanitized between uses. Soak PETG parts in |
[* icon_note] Bag penetrator and flutter valve fittings are outside the bag and must be replaced or sanitized between uses. Soak PETG parts in |
[* black] 3D print files for the Bunny PAPR are available at https://www.thingiverse.com/thing:4243272 |
[* black] 2nd repository at |
[* black] 2nd repository at |
[* black] I print PETG with nozzle at 255C/260C, bed 85C/90C, 0.2 mm layer height, 3 perimeters, 4 top / bottom layers, 20% gyroid. Higher temperature than usual is to enhance interlayer fusion. |