| [title] 3D Parts Post Print & Assembly |
| [* black] Experienced 3D printers will note this project requires minimal post print processing. Do inspect prints for stringing and remove fine stringing with heated air. Remove burrs as needed. 3 mm bolt passages are easier to use if one runs a 3 mm drill through them before assembly.
|
| [* red] Consider lapping the top the fan flange so it seals tighter against bag penetrator 22 mm fitting. |
| [* green] Fan attaches to its mount and flange via M3 screws and nuts. Length of screw should be 5 mm longer than fan thickness.
|