Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #12

Edit by Guy Kuo

Edit approved by Guy Kuo

Before
After
Unchanged

Step Lines

[title] Donning
[* black] Preassemble HALO configuration with fittings and bag.
[* black] Recheck fenstrations are actually open through bag.
[* black] Turn on gas flow or fan. If using gas flow, best comfort flow rate is 10 L/min.
[* icon_caution] Lower rate 5 L/min as with fan requiresmay require dual expiration and 22 mm expiration tubestubes, but verify positive pressure is maintained during inspiration. If this is your first time with Bunny Science HALO payHALO, do an N95 fit leak test. Pay attention to your resp rate and minimize exertion.
[* icon_caution] Lower rate 5 L/min as with fan requiresmay require dual expiration and 22 mm expiration tubestubes, but verify positive pressure is maintained during inspiration. If this is your first time with Bunny Science HALO payHALO, do an N95 fit leak test. Pay attention to your resp rate and minimize exertion.
[* black] Arrange bag neatly around neck leaving ample slack for inflation. Secure around neck with soft, personal utility strap.
[* icon_caution] Do not over tighten neck strap! It only has to be like a necktie or scarf. Positive pressure design means you don't have to hermetically seal around neck.