bunnyscience

Site Navigation

Your Account

Choose Language

Changes to Step #12

Edit by Guy Kuo —

Edit approved by Guy Kuo

Before
After
Unchanged

Step Lines

[title] Donning
[* black] Preassemble HALO configuration with fittings and bag.
[* black] Recheck fenstrations are actually open through bag.
[* black] Turn on gas flow or fan. If using gas flow, best comfort flow rate is 10 L/minfan power. Close the open end of bag and verify the bag inflates.
[* black] Turn on gas flow or fan. If using gas flow, best comfort flow rate is 10 L/minfan power. Close the open end of bag and verify the bag inflates.
[* icon_caution] If this is your first time with Bunny Science HALO, do an N95 fit leak test. Pay attention to your resp rate and minimize exertion.
[* black] Arrange bag neatly around neck leaving ample slack for inflation. Secure around neck with soft, personal utility strap.
[* icon_caution] Do not over tighten neck strap! It only has to be tight enough create a positive pressure seal.