bunnyscience

Site Navigation

Your Account

Choose Language

Changes to Step #32

Edit by Guy Kuo —

Edit approved by Guy Kuo

Before
After
Unchanged

Step Lines

[title] Parts for Assembly of Halo Fan PAPR
[* red] 51 mm blower fan, 12 VDC, 150 to 250 Pas static pressure capable
[* violet] Two conductor, flexible wire cable 120 cm long (about 4 feet)
[* green] DC barrel connectors 2.1/5.52.1 x 5.5 mm with pigtails. Both male and female are used.
[* green] DC barrel connectors 2.1/5.52.1 x 5.5 mm with pigtails. Both male and female are used.
[* blue] M3 x 25 mm screws and nuts (two each). Length of screw will vary if fan thickness changes.
[* yellow] Three zip ties
[* orange] Heat shrink tubing. Three sizes to insulate smaller wires and overall cabling.