Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #37

Edit by Guy Kuo

Edit approved by Guy Kuo

Before
After
Unchanged

Step Lines

[title] Fan Mounting Band (Flex Fit Version)
[* black] Halo Flex Fit places fan on top of head via a banded mount. (Band is in two halves so can fit print plate)
[* light_blueicon_note] Arrow indicates forward direction for airflow. (Older dual loop pointedairflow and fan to left rathe rather than forward)outlet.
[* black] Insert bolts from below mounting band halves. Position the two halves interlocked with bolts facing up.
[* black] Halo Flex Fit places fan on top of head via a banded mount. (Band is in two halves so can fit print plate)
[* light_blueicon_note] Arrow indicates forward direction for airflow. (Older dual loop pointedairflow and fan to left rathe rather than forward)outlet.
[* black] Insert bolts from below mounting band halves. Position the two halves interlocked with bolts facing up.
[* orange] Orient blower fan with output facing in same direction as arrow (forward)
[* green] Add fan flange and secure with M3 screws and nuts. Once screws are tight, the two band halves will remain together
[* green] Add fan flange and secure with M3 screws and nuts. Once screws are tight, the two band halves will remain together
[* icon_note] Flange can fit in two orientations, but notice that the correct on is better centered on fan body

Image 1

Old Version

New Version