Step Type:

Drag to rearrange

Three regular M3 nuts and one M3 Nylock must be installed.

On the Motor Plate Gearbox, it is absolutely vital to use washers with your drawing bolt. Otherwise, head of bolt will damage these index depressions around the bolt holes. Damage makes mating motor plate with extruder body difficult.

M3 Nylock for idler door bolt. We use Nylock here because idler door bolt is not secured under tension. It needs Nylock to help keep it in place.

Regular M3 Nut

Regular M3 Nuts, but be mindful of excessive bolt length during drawing in process.

Your contributions are licensed under the open source Creative Commons license.