Help

Step Type:

Drag to rearrange

Insert two M3 x 12 extruder body mounting screws, but leave them slightly loose.

Best alignment of extruder body x-carriage is achieved if final tightening of bolts is done after all bolts are inserted.

M3 x 30 mm motor plate mounting screw. Optionally, grind this to 27 mm for easier motor plate removal.

M3 x 40 mm idler door hinge screw. Just insert this one, but don't engage its Nylock yet. We are inserting now only to help with alignment.

Tighten screws to two finger firmness after all are inserted.

Your contributions are licensed under the open source Creative Commons license.