Help
Editing Step 49 —

Step Type:

Drag to rearrange

Insert motor into motor plate gearbox. Motor plate is notched and recessed for easy motor insertion. Do not secure the motor yet.

Mind the direction of motor connector. It must be pointed leftward or up (viewed from front)

Loosely secure motor with three M3 x10 mm screws and washers. Leave the screws LOOSE. You may need more than one washer if motor has shallow threading.

Add spacer to shaft. Flat side of spacer should be oriented up (away from gearbox).

Your contributions are licensed under the open source Creative Commons license.