Help
Editing Step 72 —

Step Type:

Drag to rearrange

Top covers supplied for stand alone, MMU2S, PC4-M6, PC4-M10, and Pallete 2

REMOVE INTRINSIC SUPPORT from around LED view port before using top covers.

4 mm x 10 mm long, top cover PTFE tube for standalone cover should be internally chamfered on both ends.

MMU2S and Palette 2 owners, pass PTFE tubing all the way through top cover and another 5 mm INTO extruder body.

10 mm PTFE segment is not used with covers having full pass-through. PC4-M10, MMU2S and Pallete2 covers have full PTFE pass through.

Frosted tape inside top cover LED observation window is an excellent diffuser.

Your contributions are licensed under the open source Creative Commons license.