Editing Step 76 —

Step Type:

Drag to rearrange

You should have already prepared the x-carriage belt paths but we will repeat instructions. There are two belt paths on x-carriage.

Use TOP belt path for Bear axis

Use Bottom belt path for Prusa axis

Add 4 tooth long segment of GT2 belt in unused path to reinforce thin, toothed plastic segments.

With tensioner bolts engaged but only screwed in 1-2 turns, insert x-belt NEARLY taught, but remaining loose. There is plenty of adjustment range. No need to stretch belt while putting into clamp.

Your contributions are licensed under the open source Creative Commons license.