Step Type:

Drag to rearrange

51 mm blower fan, 12 VDC, 150 to 250 Pas static pressure capable

Two conductor, flexible wire cable 120 cm long (about 4 feet)

DC barrel connectors 2.1 x 5.5 mm with pigtails. Both male and female are used.

M3 x 25 mm screws and nuts (two each). Length of screw will vary if fan thickness changes.

Three zip ties (optional with current PAPR design)

Heat shrink tubing. Three sizes to insulate smaller wires and overall cabling.

Your contributions are licensed under the open source Creative Commons license.