As stated before 54 tooth now, not 56.
M3x12 is too long!
I don’t see any mating on the sanded side??
I started to build an assembly file of my own, but working with stl-files is horror and extremely time consuming.
Are there any CAD assembly files available for the different configurations? Optimally in step format. That would greatly help to understand the building of this B&B extruder and which print files are needed for which printer!
No mention of bolt length?
The width of the pocket is 6.35mm so I assume that 2 x 5 x 10mm (magnet) is a slip of the pen.
The magnets I received from Prusa are 2 x 6 x 10mm!
Once they have, you'll be able to view a graph of their reputation gained over time.
Here's a preview of what the graph will look like:
No reputation gained yet.
As stated before 54 tooth now, not 56.
M3x12 is too long!
I don’t see any mating on the sanded side??
I started to build an assembly file of my own, but working with stl-files is horror and extremely time consuming.
Are there any CAD assembly files available for the different configurations? Optimally in step format. That would greatly help to understand the building of this B&B extruder and which print files are needed for which printer!
No mention of bolt length?
The width of the pocket is 6.35mm so I assume that 2 x 5 x 10mm (magnet) is a slip of the pen.
The magnets I received from Prusa are 2 x 6 x 10mm!